fuhao@heavstymarking.com
0102
HW-618 Riding - type Thermoplastic Extrusion Marking Machine: A Premier Traffic Marking Solution
Key Features
Engine and Fuel System
Powered by the trusted Kubota V1505 engine, which delivers a power output spanning from 19 - 37kw, the HW-618 ensures rock - solid and efficient operation. It runs on diesel, stored within a tank measuring 1001830cm. This robust engine serves as the very core of the HW-618 Riding - type Thermoplastic Extrusion Marking Machine, empowering it to execute diverse marking tasks with remarkable ease.
Electronic and Steering Systems
Fitted with a 12vdc electronic system, the machine enables seamless and precise control over all its functions. The steering mechanism, a standard mechanical setup operating via a worm - gear and roller system, offers unparalleled maneuverability. This characteristic is a pivotal element of the HW-618 Riding - type Marking Machine, allowing operators to navigate the machine with pinpoint accuracy, even in the most intricate marking scenarios.
Driving and Braking Mechanisms
The travel drive and braking system, supplied by Danfoss, makes use of hydrostatic transmission. This not only propels the machine forward but also functions as an efficient service brake. The parking brake, a hydraulically - controlled multi - disc brake, provides dependable stopping power, enhancing safety during operation. This advanced system is fundamental to the smooth and seamless operation of the Thermoplastic Extrusion Marking Machine.
Key Components and Performance Parameters
The HW-618 is equipped with top - tier components that underpin its exceptional performance. The details are presented in the table below:
| Component | Specification |
| Tires | Front Tires: 6.00 - 9 12PR, 5 - hole rim / Rear Tires: 6.00 - 9 12PR, 5 - hole rim |
| Compressor | EV80 - type 2 - cylinder Boge compressor, mechanically driven by a Poly - V belt, with a delivery capacity of 1,060 L/min |
| Operating Pressure | 7 bar, featuring a silenced safety valve |
| Insulated Paint Cylinder | Comes with a stirrer, and other container sizes can be customized upon request. Capacity: Inner diameter 940, height 770, volume 534L, roughly 0.53 cubic meters (around 1T) |
| Heat - Transfer Oil Heating | Operated by diesel via an American direct - injection stove |
| Extruder | Varies according to the path, with different extrusion widths (5/10/12/20cm) available |
| Additional Equipment | Features a quick - cleaning device for the extruder head |
| Glass Bead Device | A path - specific bead spreader with a maximum width of 30cm can be provided as per request, using pneumatic spraying |
| Empty/Total Weight | Approximately 1.8T |
| Dimensions (Length x Width x Height) | Roughly 3.9 * 1.25*1.85 m (excluding the actuator) |
Multifunctional Marking Capabilities
The HW-618 Riding - type Thermoplastic Extrusion Marking Machine is a paragon of multifunctionality. It can carry out a broad spectrum of marking techniques, such as thermoplastic extrusion coating, thermoplastic dot coating, thermoplastic oscillation, two - component flinging, scraping and oscillation, two - component dot coating, and cold spraying. This versatility renders it suitable for a wide array of traffic marking projects, ranging from small - scale local road markings to large - scale highway construction undertakings.
In summary, the HW-618 Riding - type Thermoplastic Extrusion Marking Machine by Heavsty Transportation Technology is a comprehensive and highly efficient marking solution. Its blend of advanced features, high - performance components, and multifunctional capabilities makes it the ideal choice for professionals in the traffic marking industry. With its unwavering focus on quality and innovation, Heavsty Transportation Technology continues to set new benchmarks with the HW-618 Riding - type Marking Machine in the field of Thermoplastic Extrusion Marking Machines.
